Fascinating Argumentative Essay Sample Abortion Shouldnt be Legal

Argumentative Essay Sample Abortion Shouldn't be Legal Introduction A young woman from California was cramping and bleeding in a toilet at her friends house, trying to abort her baby. Ironically, it was her birthday; however, instead of celebrating her own birth, she was deliberately making sure that a life which was growing inside her would never have a birthday to celebrate. Despite having a successful abortion, she could not get over the grief and guilty feeling for killing an innocent life. It is not the first case. There are many women in the world who opt for abortion due to immense pressure from society and fear to stand against the majority. Many of such women agree that they regret their decision and would not take such a step, if abortion was not legal. Therefore, abortion should not be legal. Even unborn babies are human beings with the fundamental human right to life and it needs to be conserved.

Essay about Importance of Environment in Shakespeares...

Importance of Environment in The Tempest The island is full of noises; Sounds and sweet airs, that give delight,† says Caliban. The responses which the characters in The Tempest offer to their immediate surroundings reveal much about their individual traits, at the same time they allow the audience glimpses of Prosperos island as different parts of the island are isolated in the play. The island itself and the sea that surrounds it may be seen as encompassing elemental nature and throughout the play, the elements are used to emphasize the inherent nature of characters (notably Ariel and Caliban) as these elements to an Elizabethan audience possessed primarily certain qualities attributable to matter (Tillyards Elizabethan†¦show more content†¦In placing the court party in an environment which is in stark contrast to the elaborate court from which they came and also the source of Antonios treacherous behavior, their barren surroundings are an apt setting for change to be initiated and recognized, most notably in Alonso. As the rest of the court party sleeps, Antonio is placed in a situation where Prospero may observe Antonios genuine lack of repentance for his past sins. Similarly, he deliberately places Caliban with Trinculo and Stephano, which affords Caliban the opportunity to gain more valuable self-knowledge. Caliban has been shown to be highly passionate in his response to stimulus, as seen in his lustful intent on Miranda, but does not know the reason why this is wrong, Prospero creates an opportunity where he could possibly become a better judge of people. The atmosphere surrounding a character often reflects his state of mind. Alonsos barren surroundings reflect the infinite loss and sadness over the presumed death of Ferdinand. The temporary respite, from the burdens of ruler that Prospero enjoys during the performance of the betrothal masque, is manifest in the joyous and celebratory mood created by the pastoral imagery in the songs and performance. However, when Prospero is startled by his sudden recollection of Calibans foul conspiracy, his troubled mind is immediately reflected in the strange, hollow andShow MoreRelated Conflict and Harmony in The Tempest Essay1390 Words   |  6 PagesConflict and Harmony in The Tempest   Ã‚  Ã‚   William Shakespeare describes a utopic world saturated with supernatural images and ideas which works to create the mysterious island where The Tempest takes place.   This is one of Shakespeares best examples of how a natural harmony reveals itself through the actions of discourse and confusion.   To illustrate this idea best one must examine the historical context upon which The Tempest is based.   Because this play was published in the early 1600sRead MoreThemes And Values Of Walt Disney s The Tempest 2409 Words   |  10 PagesDisney’s Pocahontas was a recreation of the classic Shakespearean play known as The Tempest. There seems to be apparent evidence for this case within the characterization and the story line. However, it can be difficult to fully see the relationship between both of these works without understanding the purpose behind each one. As a result, by reviewing the original themes and values that were apparent in Shakespeare’s final masterpiece, one will be able to see the validity of this argument and determineRead MoreEssay on The Moor in the Works of William Shakespeare4150 Words   |  17 PagesThe Sources and Representations of the Moor in the Works of Shakespeare      Ã‚  Ã‚   One theme consistently reemployed throughout Shakespeares plays is that of the Other. The Other is usually characterized as a character that is somehow separated, stigmatized, or noted as being different from the mainstream ideal. For the Elizabethan England of Shakespeares time, it may have been a self-defensive maneuver against the encroachment of something which threatened too close to home (Bartels 450). BryantRead MoreFemale Sexuality in Shakespeare4830 Words   |  20 Pagessexuality in Cymbeline, the Sonnets, and one of the plays: A Midsummer Night’s Dream, Richard II, Hamlet, Antony and Cleopatra, Measure for Measure or King Lear.       Both Cymbeline and A Midsummer Night’s Dream  (AMND)  are both set in a patriarchal environment where both genders grapple for control. Valerie Traub defines the distinction between gender sex and gender behavior as â€Å"Sex refers to the . . . biological distinctions between male and female bodies. Gender refers to those meanings derived fromRead MoreWilliam Shakespeare s King Lear2504 Words   |  11 PagesLear s endeavor gets revitalized with every generation that hears the saga, whether from myths, fairy tales, or from King Lear itself. A timeless story, King Lear remains one of Shakespeare’s greatest tragedies for its universal themes involving communication, morality, and family. The fall of characters in King Lear presents audiences with the frailty a community can exhibit from rulers’ pride. Stressing this message, Shakespeare mirrors the main plot surrounding Lear s family with the sub-plotRead MoreT.S. Eliot s The Fire Sermon - a Poem Analysis Fo cusing on the Elements of Nature5145 Words   |  21 Pagesemphysema at his home in London on January 4, 1965. 3. The Fire Sermon The Fire Sermon is the third part of The Waste Land. The title is derived from a similar named work by Buddha, which T.S. Eliot himself considered corresponding Â…in importance to the sermon of the mountÂ… (Eliot 1971: 148). In addition to the title, at the end of the poem Eliot also refers to this work. 3.1 Structure The structure of the Fire Sermon is not easy to analyze. The poem does not have a straight rhymeRead MoreGp Essay Mainpoints24643 Words   |  99 Pagesmodification f. Right tech for wrong reasons 3. Arts/Culture a. Arts have a future in Singapore? b. Why pursue Arts? c. Arts and technology d. Uniquely Singapore: Culture 4. Environment a. Developed vs. Developing b. Should environment be saved at all costs c. Are we doing enough to save the environment? d. Main reasons for environmental problems nowadays 5. Religion a. Religion divides more than it unites b. Religion and politics c. Science and religion 6. Terrorism

Literary Techniques Edgar Allan Poe And Richard Connell

Macabre; a word meaning disturbing and horrifying through the depiction of death or injury, is not the easiest word for a writer to portray. However, while it may not be easy to show through words, it isn’t impossible. There are two main ways an author can give an overall feeling of macabre; literary style and technique. Only the most skilled authors have successfully used various literary elements, like suspense and foreshadowing, to create ageless stories and earn a position in the history of literature. Well known authors, such as Edgar Allan Poe and Richard Connell, use specific literary techniques to inspire and horrify young minds through their timeless works of literature. Biography of Edgar A. Poe To start, Edgar Allan Poe suffered through tragedy, poverty, and failure most of his life, all trials that would mold him into a master of macabre literature. In January of 1809, Edgar Allan Poe, writer and poet, â€Å"†¦was born in Boston, Massachusetts. Poe’s father and mother, both professional actors, died before the poet was three years old, and John and Frances Allan raised him as a foster child in Richmond, Virginia.†(â€Å"Edgar Allan Poe†). Poe never truly knew his parents before they tragically passed on. Yet, being almost three years of age, he did have some sense of loss, an emotion often present in his short stories and poems. About thirty years later, Poe found himself burdened by poverty, and in 1842, his wife, the person who brought him peace at this time, wasShow MoreRelatedInfluence Of A Life By Richard Connell And Edgar Allan Poe1600 Words   |  7 PagesLife Richard Connell and Edgar Allan Poe, two of the most famous authors at the time, are recognize by the different types of literature they wrote. Several of these pieces are still popular today. In many cases the life of the author can impact the different themes, or the techniques they use in their stories. Richard Connell’s and Edgar Allan Poe’s backgrounds reflects in the writing techniques they used to captivate their audience. Biography of Richard Connell The famous writer Richard Connell

Strategic Emergent Construction Procurement â€Myassignmenthelp.Com

Question: Discuss About The Strategic Emergent Construction Procurement? Answer: Introduction The methods of procurement have not been modified considerably through the past 20 years. Although, overruns of costs and time still remain prevalent through the whole industry. Disputes have often arisen and in an action to lower these incidents of cost and time overruns, procurement methods like alliancing and partnering have been recently advocated. However, not all procurement methods for projects of particular types because the priorities and objectives of clients often differ invariably. The choice of a procurement system arises from an effective match between the objectives of the clients and their priorities. It is an essential requirement that all the characteristics of several procurement methods. The methods of selection that are available should be properly understood by the clients before selection. The report presents the characteristics of the modern procurement systems discussing their advantages and disadvantages. The methods are steered by the government guidelines and the Australian Local Government Procurement Guide and the Western Australian Department of housing and works. Procurement strategy Constructing a new building is necessary when there is no other existing building. A situation where a building already exists and seems that it will meet the needs of the client will only necessitate adapting or renovating(Roberts, 2010). A project is implemented to deliver auditing solutions to the particular needs of the client whether investment, improving efficiency or expansion. A client can decide to opt for a new building to forego renting, purchasing an existing structure from real estate and leasing. Design and construct procurement In this system, the contractor will accept some or all responsibility for a design. The contract states expressly the responsibility accepted to clearly outline the extent of liability. The contract may state otherwise depending on the objectives and interests of the client and agreed upon by both parties. Liability in the design and construct procurement system is absolute under which the contractor will warrant fitness for the intended purposes(McDermott, 2016). Some forms of this procurement method can limit the liability of the design of a contractor to ordinary duty as a profession requiring the exercise of ordinary skill and care. When an independent consultant is engaged by the main contractor do not have liabilities which is higher than the normal. Liability acceptance in form of indemnification is more likely to be worthless if not backed by an indemnity insurance cover. It is, therefore, necessary to crosscheck for a valid cover before the appointment(Sourani, 2012). In most cases, contractors don't have in-house designers, the identity of external designers who will be used must be established before acceptance of the tender(Smith, 2013). The requirements of the client are simply a schedule of accommodation and a site plan clearly demarcating their detailed specification. It is the choice of the client to restrict the input of the client to take the supplied scheme. He/she will be left with the task of developing details of the sche me and the production information. It is, however, advisable for the client to rather specify the performance requirements and leaving the full responsibility for design and choice to the contractor(Masterman, 2003). The design and construct method gives certainty about the sum of the contract and also offers benefits on cost. There is a close integration between this method and the relative freedom which the contractor has to use their knowledge of the market and purchasing power. These abilities a competitive price for the client. It is easy to attain a fast start on the site and the ability to formulate a closer integration will result in effective programming. However, preparing a suitable combination of requirements and comparing of schemes of competing tenders will consume a great deal of time. After signing the contract, further changes by the client will be implemented(Mohsini, 2013) Advantages There is a reduced need for committing resources and time to contract separate designers and contractors because the client deals with a single firm. A certainty of price is attained before commencement. The use of a guaranteed maximum price with the option for savings encourages innovation to reduce time and cost. The time for the project is reduced by overlapping design and construction. The input of the contractor in design improves constructability. Disadvantages The building constructed is functional rather than being prestigious. The building is not complex and has reduced technical innovation. There is a high possibility of changing scope design. A single firm is required for both design and construction. Overlapping the design and construction processes are meant to accelerate the project. Management procurement system Management procurement covers contracting, construction, design and management. Operations contracting gives the contractor direct links to contract with the work contractors and is responsible for all the works. Construction management involves payment of a professional fee to manage a program, develop it, coordinate design and construction and improve the constructability of the project by facilitating collaboration(Tookey, 2011). Management contracting The client will employ a professional team which is independent together with a management contractor who will act as advisers at the preconstruction stages and executors of works when construction kicks off by the use of direct works contracts(Masterman, 2003). There is an enabled possibility of making an early on-site leading to achievement of early completion. Flexibility is increased and the client can change design during progress because matters of details and the drawings may be adjusted and completed while work is proceeding. The success of this type of contracting requires trust and collaboration between the client, the contractors, and consultants. Appointment of the contractor should be done before the outline of the design stage. His role is to advise on design, tendering, delivery and construction. The contractor submits written documentation of fees and will be employed after an interview with the design team and the client(Georghiou, 2007). The fee should include total service as a percentage of total cost. The service covering preconstruction should not proceed to the site. Work is undertaken on basis of cost plan, project drawing, and specification. Certainty about program and costs forcing the client to accept almost all the risks. The works packages will be facilitated by competitive tenders with bills of quantities as lump sum contracts. Construction management A contractor will be carefully selected after payment of management fee. Work contracts are direct between the works contractor and the client. The client, therefore, has a greater control and similarly accepts a great deal of risk. The role of the management contractor is to act as an agent and not to project completion within time and costs(Greer, 2002). The construction management has the following advantages as listed below. Reduced contract variations. It allows overlapping of design and construction. Nominated trade contractors are not necessary. Developed documentation. Management expertise is involved in management at an early time. The split of construction activities and work packaging enhances completion of large projects. The confrontation between the construction supervision team and the design team is reduced. Design and manage The contractor accepts responsibility for works contractors and the design team after being paid a fee. The contractor manages the organization and creates project design. He manages works and delivers the project for a fee by employing sub-contractors to for designing and construction. The consultant for project designing and management is the agent to the client who also obtains sub-contracts from works contractors through tenders, who will enter into direct contracts with the client(Dulaimi, 2001). Advantages of management procurement There is flexibility allowing for changes in design. The contractor will assume the risk and the responsibility of design and construction. The responsibilities, risks, and roles of each party are clear. The input of the constructor into design improves constructability. Competitive prices that are current are associated with work packages. Overlapping of construction and design saves on time. There are an improved collaboration and coordination between constructors and designers as a result of dealing with one firm. Disadvantages Certainty of price is poor. The certainty of price will be attained only after letting the final works. The client must be proactive and informed. A close control of information and time is required. Necessary resources must be committed so that design can be complete. The client does not have a direct control over design. Collaborative procurement system Also called the relational system, this type of procurement develops and gains strength from the investigation and perception showing that the industry is fragmented, incapable, adversarial and ineffective(Dainty, 2007). One firm will, therefore, practice by teamwork and partnering. The principles in collaborative procurement should be established at an early stage of the project with the help of independent advisers. The appropriate procedures should be set up and documented. These activities are done to assist selecting procurement route, contracting and formation of tender documents (Goulding, et al. 2012). The implementation of the practice should be discussed in a detailed manner in the pre-contract meetings, start-up meetings of the consultant teams, the special contractor. The construction strategies of the government public projects to adopt design and pre-contract type procurement routes and initiatives of private finance since they are more collaborative. The traditional no n-collaborative systems are considered to be adversarial(Brchner, 2005). Alliancing describes an approach to the management which encourages trust and openness between the parties involved. Success requires the parties to be dependent on one another necessitating a change in attitude, culture, and procedures in the procurement process. It is mostly applicable to projects which are large, long-term and have a high risk(Maltz, 2002). Strategic partnering involves a multiple-project relationship whereas the project partnering refers to a specific project. The system has clear established routes of authority and communication with pre-formed conventions for preparation and distribution of information. Putting of the contractor and consultant team into a common target for cost creates joint pain and joint gain thereby creating a financial motivation(Angappa, 2008). It involves co-location of team members and an initiative for the reward of the clients teams with assessment done on basis of the normal activities. The recognition and reward system keeps the individuals in the team motivated. Communication is enhanced through regular team meetings and workshops to develop teamw ork. Warning procedures are based at the start of a problem and resolution is based on the solution. Continuous benchmarking, assessment, target marking, adaptation, and feedback ensure continued improvement of the building project(Manley, 2004). Advantages The collaboration will encourage high-quality procurement system to be established and developed. Brainstorming will enable the development of creative solutions at an early stage which also reduces the costs. Consistent teamwork establishes relations and will produce better results. Collaboration integrates the process of design and construction. The risks and rewards are shared. It helps in the adoption of efficient processes and procedures. Emphasis is put on the elimination of duplication which wastes time and resources. It forms a pool of resources that is secure. Disadvantages Reduced responsiveness to change. Obligations are taken up by the client. There is limited flexibility to take up better upcoming solutions. Conclusion The client has an open freedom to choose a system that best satisfies his objectives and should seek the services of an independent advisor. A consideration which should be put in practice is the identification of all prevalent risks and formulate an early solution to overcome. The factors that influence the selection of a strategy to selected involve the external factors of economy, commerce, technology, and the social and legal frameworks. The resources that the client has, the characteristics of the project and the level of flexibility are significant considerations. Other considerations will include cost issues and timing. References Angappa, G., 2008. Concurrent engineering: a strategy for procuring construction projects. International Journal of Project Management, 16(6), pp. 375-383. Brchner, J., 2005. Managing information flow in construction supply chains. Construction Innovation, 5(1), pp. 71-82. Dainty, A., 2007. Perspectives of UK housebuilders on the use of offsite modern methods of construction. Construction Management and Economics, 25(2), pp. 183-194. Dulaimi, M., 2001. Empowering innovative improvements through creative construction procurement. Engineering Construction and Architectural Management, 8(5), pp. 325-334. Georghiou, L., 2007. Public procurement and innovationResurrecting the demand side. Research Policy, 36(4), pp. 949-963. Greer, J., 2002. Partnerships and public procurement: building social capital through supply relations. Public Administration, 80(3), pp. 503-522. Jack Goulding, Girma Zawdie, 2012. Construction innovation and process improvement. 7 ed. New Jersey: John Wiley Sons. Maltz, A., 2002. Becoming an" interesting" customer: Procurement strategies for buyers without leverage. International Journal of Logistics, 5(2), pp. 177-195. Manley, K., 2004. Key influences on construction innovation. Construction Innovation, 4(3), pp. 143-154. Masterman, J., 2003. An introduction to building procurement systems. , .. 5 ed. New York: Routledge. McDermott, P., 2016. Strategic and management issues in construction procurement. Procurement systems, 4(1), pp. 3-26. Mohsini, R., 2013. Knowledge-based design of the project-procurement process. Journal of computing in civil engineering, 7(1), pp. 107-122. Roberts, J., 2010. The economics of modern manufacturing: Technology, strategy, and organization. The American Economic Review, 21(4), pp. 511-528. Smith, A., 2013. Building procurement. 2 ed. New Jersey: John Wiley Son. Sourani, A., 2012. Barriers to addressing sustainable construction in public procurement strategies. Building procurement, 2(17), pp. 93-107. Tookey, J., 2011. Construction procurement routes: re?defining the contours of construction procurement. Engineering Construction and Architectural Management, 8(1), pp. 20-30